Netgear WFS709TP WFS709TP Hardware manual - Page 20

WFS709TP ProSafe Smart Wireless Switch Hardware Installation Guide You can manually determine the locations for APs, or use a Web browser to access the switch's built-in RF Plan tool and perform the following tasks: • Define the physical site parameters. • Determine how many access points are needed and where they should be located. • Simulate network failures and recovery characteristics, and adjust placement if necessary. 4. Physical installation of the Wireless Access Points Refer to the document Installation Guide: WFS709TP ProSafe Smart Wireless Switch and to the documentation included with your access points. 5. Advanced configuration of the WFS709TP ProSafe Smart Wireless Switch Configuration requires someone who understands the company's network and has experience managing routers, switches, servers, and clients. The following tasks are involved: • Configure the planned network features via the Web interface. • Test and verify the deployment. The WFS709TP ProSafe Smart Wireless Switch Software Administration Manual provides information and examples of the switch's more advanced features. 1-8 Introduction v1.0, May 2007