Netgear WG302 WG302v1 Reference Manual - Page 43
SSID and WEP Settings Setup Form
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual SSID and WEP Settings Setup Form For a new wireless network, print this form and fill in the parameters. For an existing wireless network, get the settings from the person who set up or is responsible for the network. Be sure to set the Regulatory Domain correctly as the first step. Store this information in a safe place. • SSID: The Service Set Identification (SSID) identifies the wireless local area network. NETGEAR is the default WG302 SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below. SSID Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID: • Authentication Circle one: Open System or Shared Key. Choose "Shared Key" for more security. Note: If you select shared key, the other devices in the network will not connect unless they are set to Shared Key and have the same keys in the same positions as those in the WG302. • WEP Encryption Keys For all four 802.11b keys, choose the Key Size. Circle one: 64, 128, or 152 bits Key 1 Key 2 Key 3 Key 4 WPA-PSK (Pre-Shared Key)WPA2-PSK (Pre-Shared Key) Record the WPA-PSK key:Record the WPA2-PSK key: Key Key WPA RADIUS Settings For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port Shared Secret WPA2 RADIUS Settings Basic Installation and Configuration v4.0, April 2006 2-19