Netgear WG302 WG302v1 Reference Manual - Page 52
Configuring WPA2-PSK
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual Figure 2-15. 5. From the Network Authentication drop-down menu, select WPA2 with RADIUS from the list. By default, Data Encryption will be set to AES. 6. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations. 7. Click Apply to save your settings. Configuring WPA2-PSK Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. To configure WPA2-PSK: 1. From the Network Authentication drop-down menu, select WPA2-PSK from the list. By default, Data Encryption will be set to AES. 2. Enter the preshared key passphrase (Network Key). 3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is int4nded for hotspots and other public access situations. 4. Click Apply to save your settings. 2-28 v4.0, April 2006 Basic Installation and Configuration