Netgear WG302 WG302v1 Reference Manual - Page 61
CLI Commands, Using Syslog and Activity Log Information - login
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual These settings appear below the connector on the back panel. 3. Press Return, and the screen below should appear. Figure 3-2. 4. Enter the login name and password (admin and password are the defaults). After successful login, the prompt should appear. In this example, the prompt is netgear74F35E. 5. Enter help to display the CLI command help. CLI Commands The CLI commands are listed in Appendix C, "Command Line Reference." Using Syslog and Activity Log Information The Activity Log screen displays the Access Point system activity. It also allows you to enable the SysLog option if you have a SysLog server on your LAN. To view the Activity Log and enable a SysLog server: 1. From the main menu of the browser interface, under Information, select Activity Log, The Activity Log screen will display. Management 3-3 v4.0, April 2006