Netgear WG302 WG302v1 Reference Manual - Page 76
Wireless LAN parameters, From the main menu under Advanced
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
NETGEAR ProSafe 802.11g Wireless Access Point WG302 Reference Manual • Wireless LAN parameters. The default advanced wireless LAN parameter settings usually work well. However, if you want the WG302 to operate in Super-G mode, use this feature To set up Advanced Wireless Settings: 1. From the main menu under Advanced, Select Advanced Wireless Settings. The Advanced Wireless Settings screen will display. Figure 4-3. 2. Wi-FI Multimedia (WMM) is disabled (No) by default. Select the Yes radio button to enable WMM support. 3. Enable the Wireless LAN Parameters by checking the Yes radio button and entering the appropriate information in the fields described in Table 4-1, below. Table 4-1. Advanced Wireless LAN Settings Fields Field Enable SuperG Mode RTS Threshold Fragmentation Length Description Click Enable to enable SuperG Mode. The packet size used to determine whether it should use the CSMA/CD (Carrier Sense Multiple Access with Collision Detection) or the CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) mechanism for packet transmission. The default is 2346. This is the maximum packet size used for fragmentation. Packets larger than the size programmed in this field will be fragmented. The Fragment Threshold value must be larger than the RTS Threshold value. The default is 2346. 4-4 Advanced Configuration v4.0, April 2006