Netgear WG302 WG302v1 Reference Manual - Page 73
Advanced Configuration, IP Settings for Wireless Clients - repeater mode
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 4 Advanced Configuration This chapter describes how to configure the advanced features of your ProSafe 802.11g Wireless Access Point . The features provide the following functions and are located under Advanced in the main menu. • IP Settings. Using the wireless access point as a DHCP server for wireless clients. • Hotspot Settings. Enabling HTTP redirect. • Wireless Settings. Configuring advanced wireless LAN parameters. • Access Point Settings. Enabling wireless bridge and repeater modes. These features can be found under the Advanced heading in the main menu. IP Settings for Wireless Clients You can turn this access point into a DHCP Server for wireless clients for both DHCP-enabled wireless clients as well as for static-IP enabled clients. The default advanced IP wireless settings usually work well. This feature is intended for use by a systems administrator. By default, this feature is not enabled. To use this access point as a DHCP server: 1. From the main menu under Advanced, select IP Settings. The Advanced IP Settings for Wireless Clients screen will display. 2. Check Use AP as DHCP server and select one of the following options for managing the wireless clients: • Accept DHCP Enabled Wireless Clients Only. The Access Point will only provide the TCP/IP configurations to those wireless clients with the DHCP enabled. • Accept Both DHCP Enabled and Static IP Configured Wireless Clients. The Access Point will support wireless clients with the DHCP enabled and with the static IP configured. The Access Point will provide the preconfigured TCP/IP configurations for all wireless stations connected to this Access Point. 4-1 v4.0, April 2006