Netgear WN511B WN511B User Manual - Page 24
Select Computer-to-Computer Ad Hoc for - notebook adapter
UPC - 606449049985
View all Netgear WN511B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
NETGEAR RangeMax NEXT Wireless Notebook Adapter WN511B User Manual 1. Use the icon to open the Smart Wizard. The Settings page opens. 2. Enter the network settings. a. Select Computer-to-Computer (Ad Hoc) for the Network Type. b. Select or enter the Network Name (SSID) for the Ad Hoc network. c. In the Profile box, type the name of the profile. d. Click Apply. Figure 3-3 3. Save your settings in a Profile. a. Click Save Profile. All the configuration settings are saved in this profile. b. Click Apply. c. Click Close to exit the Smart Wizard, or Cancel to return to the previous settings. 4. Configure the PC network settings. a. Configure each PC with either a static IP address or with the IPX protocol. b. Restart the PCs. 5. Verify wireless connectivity between your peer devices. You can use the ping utility to verify your wireless connection: a. On the Windows taskbar click Start, and then click Run. b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type ping -t 192.168.0.1 and then click OK. Figure 3-4 16 v1.1, April 2006