Netgear WN511B WN511B User Manual - Page 30
Setting up WPA-PSK Security, Click Close to exit the Smart Wizard. - wpa2
UPC - 606449049985
View all Netgear WN511B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
NETGEAR RangeMax NEXT Wireless Notebook Adapter WN511B User Manual b. Use the icon to open the Smart Wizard. The Settings tab page opens. Figure 3-8 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section, select WPA2-PSK [AES]. For more information about WPA2-PSK security, see the Web link to "Wireless Communications:" in Appendix B. 3. Save your settings in a Profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply. c. Click Close to exit the Smart Wizard. Setting up WPA-PSK Security Follow the steps below to configure WPA-PSK Security. 1. Run the Wireless Adapter Smart Wizard. a. Make sure the software is installed and the Wireless Adapter is fully inserted in a Cardbus slot in your computer. 22 v1.1, April 2006