Netgear WN511B WN511B User Manual - Page 28
Setting up WEP Encryption Security, If WPA2-PSK or WPA-PSK Authentication is Used., Passphrase
UPC - 606449049985
View all Netgear WN511B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
NETGEAR RangeMax NEXT Wireless Notebook Adapter WN511B User Manual • If WPA2-PSK or WPA-PSK Authentication is Used. - Passphrase These characters are case sensitive. Enter a word or group of printable characters. When you use WPA-PSK, the other devices in the network will not connect unless they are set to WPA-PSK as well and are configured with the correct Passphrase. Use the procedures below to set up basic security settings in the WN511B. Setting up WEP Encryption Security Follow the steps below to configure WEP Encryption Security. 1. Run the Wireless Adapter Smart Wizard. a. Make sure the software is installed and the Wireless Adapter is into the Cardbus slot in your computer. b. Use the icon to open the Smart Wizard. The Settings tab page opens. Figure 3-7 2. Configure the Security settings. a. In the Profile box, select the profile or type in a profile name. b. In the Network Name (SSID) field select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. c. In the Security section, select WEP. 20 v1.1, April 2006