Netgear WN511B WN511B User Manual - Page 35
Troubleshooting, Troubleshooting Tips, Frequently Asked Questions - firmware
UPC - 606449049985
View all Netgear WN511B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 4 Troubleshooting This chapter provides information about troubleshooting your wireless adapter. After each problem description, instructions are given to help you diagnose and solve the problem. For information about connecting to wireless networks and the Internet, see "Connecting to Wireless Networks and the Internet" in Chapter 2. Also, for problems with accessing network resources, the Windows software might not be installed and configured properly on your computers. Please refer to the link to "Internet Networking and TCP/IP Addressing:" in Appendix B. Troubleshooting Tips Symptom Cause Solution I can connect to an access point, but I cannot connect to other computers on the network or the Internet. This could be a Check to make sure that the access point is physically physical layer problem connected to the Ethernet network. or a network Make sure that the IP addresses and the Windows networking configuration problem. parameters are all configured correctly. Restart the cable or DSL modem, router, access point, and notebook PC. Frequently Asked Questions Use the information below to solve common problems you may encounter. Also, please refer to the knowledge base on the NETGEAR Web site at http://kbserver.netgear.com. Unless you can solve a problem right away, go online and upgrade to the latest firmware for your adapter, using the link above. The Smart Wizard keeps asking me to save my settings This is because you have made changes to the settings and the Smart Wizard is offering you the chance to save the changes. If you want to avoid these Profile setting prompts, simply click Apply before you close the Smart Wizard. 27 v1.1, April 2006