Nikon 1776 Instruction Manual - Page 20
Load Film
UPC - 018208017775
View all Nikon 1776 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Load Film 3 Turn the power switch on and load DX-coded film. With DXcoded film, film speed will be set automatically (ISO 25-5000). When the camera is turned on, film is loaded and the camera back is closed, the film automatically advances to the first frame. OX-coded film ~ISO ~ ~ "" 1), 36 (film speed) , DX mark 3.1 Turn the power switch on, confirm that the film speed setting is set to 100, then open the camera back by sliding the camera back lock release lever. ... 125 FS.6 G .~ tml. Gl( El • If the film speed setting is not set to liD , see page 36. 3.2 Insert film from the bottom side and pull film leader out to red index mark. • Do not insert the film leader beyond the red index mark. NOTE: Loading/removing film Shutter curtains are very thin. Do not touch the shutter curtains with your finger or the film leader. 20