Nikon 1776 Instruction Manual - Page 21
positioned with no slack, then gently close
UPC - 018208017775
View all Nikon 1776 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
[2] Check pOints o z o fi To change film speed with DX-coded film or select film advance mode, a: see pages 36-37. ~ o Shutter curtains are very thin. Do not touch the shutter curtains with your finger or the film leader. 0oii5 o Avoid direct sunlight when changing film outdoors. :i 3.3 Hold the film cartridge and ensure film is properly positioned with no slack, then gently close the camera back until the camera back snaps closed. Film automatically advances to the first frame. 3.4 x • When : appears on the LCD panel , the film has advanced to the first frame. • When Err and E blink in the LCD panel and viewfinder, film is not properly installed. Open the camera back again and reload film . • Ii}J and Err in the LCD panel and Err in viewfinder blink and the shutter locks when a non-OX-coded film is loaded with camera film speed set to 1i}J. Set film speed manually (page 36). • Frame number display remains when the power switch is off. • You can check the number of available exposures on the film roll through the film cartridge confirmation window. • Infrared films cannot be used since an infrared sensor is used for the detection of the film frame position. ~ B: Camera can be set to advance the film to the first frame not until the shutter release button is pressed (page 72). Set the film advance mode selector to []] (singleframe shooting) while pressing the film advance mode selector lock release. 21