Nikon 1776 Instruction Manual - Page 29
Film starts to rewind automatically when film reaches, the end of the, roll., Confirm that film,
UPC - 018208017775
View all Nikon 1776 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
o Check points z Q o Focus, shutter speed and aperture can be confirmed in the viewfinder. If any i o other warning indications appear, see page 101 . When you reach the end of the film roll , the film starts to rewind automatically. w o0. o For mid-roll rewind, see page 36. o o For self-timer operation , see page 68. o When the camera back is opened before the film is completely rewound ~ (before E blinks), warning indication (blinking 0 __ and frame counter) appears in the LCD panel and viewfinder. Refer to page 103 for troubleshooting. 7.3 Film starts to rewind automatically when film reaches the end of the roll. 7.4 • 0 __ , 0_ and then 0 appear in the LCD panel and viewfinder during film rewind and the frame counter counts down until rewind is complete. • Pictures taken on frames beyond the indicated number of the exposures for the film roll may be discarded in the process of developing . ~ I: Film rewind can be changed not to start automatically when the end of a film roll is reached (page 71). ~ 13: High-speed film rewind is normally executed. This film rewind can be changed to quiet film rewind (page 74). Confirm that film is completely rewound, then remove film cartridge. • Film is completely rewound when the frame counter shows blinking HE" in the LCD panel and viewfinder. (E appears without blinking when the exposure meter is off.) Make sure the film is completely rewound (E is blinking in the LCD panel and viewfinder), open the camera back away from sunlight and remove the film cartridge by tilting it to one side. 29