Nikon 29842-9425-19 D80 User's Manual - Page 24

Introduction: First Steps, Charging and Inserting the Battery

Page 24 highlights

Charging and Inserting the Battery The supplied EN-EL3e battery is not charged at shipment. Charge the battery using the supplied MH-18a battery charger as described below. 1 Charge the battery. 1.1 Remove the terminal cover from the battery. Li-ion BATTERY PACK 1.2 Connect the power cord to the charger and plug it in. 1.3 Place the battery in the charger. The CHARGE lamp will blink as the battery charges. About two and a quarter hours are required for an exhausted battery to fully charge. 1.4 Charging is complete when the CHARGE lamp stops blinking. Remove the battery from the charger and unplug the charger. EN-EL3e Rechargeable Li-ion Batteries The EN-EL3e shares information with compatible devices. The camera uses this information to display the battery charge state in six levels in the control panel and to show the battery charge state, remaining battery life, and number of pictures taken since the battery was last charged in the setup menu Battery Info display ( 107). 12 Introduction: First Steps

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162

12
Introduction: First Steps
Charging and Inserting the Battery
The supplied EN-EL3e battery is not charged at shipment.
Charge the battery using the sup-
plied MH-18a battery charger as described below.
1
Charge the battery.
1.1
Remove the terminal cover from the battery.
Li-ion BATTERY PACK
1.2
Connect the power cord to the charger and plug it in.
1.3
Place the battery in the charger.
The CHARGE lamp will blink
as the battery charges.
About two and a quarter hours are
required for an exhausted battery to fully charge.
1.4
Charging is complete when the CHARGE lamp stops blink-
ing.
Remove the battery from the charger and unplug the
charger.
EN-EL3e Rechargeable Li-ion Batteries
The EN-EL3e shares information with compatible devices.
The camera uses this information to display
the battery charge state in six levels in the control panel and to show the battery charge state, remain-
ing battery life, and number of pictures taken since the battery was last charged in the setup menu
Battery Info
display (
107).