Nikon D2HS D2Hs User's Manual - Page 224
ence data note that noise reduction turns, on automatically when the subject is poorly
UPC - 018208252190
View all Nikon D2HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
Menu Guide-The Setup Menu 4 With the lens ten centimeters (four inches) from a bright, featureless white object, frame the object so that nothing else is visible in the viewfinder and press the shutter-release button halfway. In autofocus mode, focus will automatically be set to infinity; in manual focus mode, set focus to infinity manually before pressing the shutterrelease button. If using the aperture ring to set aperture, choose the minimum setting (largest f/-number). 5 Press the shutter-release button the rest of the way down to acquire Image Dust Off reference data (note that noise reduction turns on automatically when the subject is poorly lit, increasing the amount of time needed to record the data). The monitor turns off when the shutter-release button is pressed. If the reference object is too bright or too dark, the camera may be unable to acquire Image Dust Off reference data and the message shown at right will be displayed. Choose another reference object and repeat the process from Step 3. Image Dust Off Reference Data Image Dust Off reference data are recorded to the memory card at an image quality of JPEG Fine and an image size of Large. When the resulting image is played back on the camera, a grid pattern is displayed and voice memos can not be recorded. Files created with Dust Off ref photo can not be viewed using computer imaging software. 210