Nikon D2HS D2Hs User's Manual - Page 30

Introduction-First Steps 2 Step 2-Insert the Battery The D2Hs is powered by a rechargeable Nikon EN-EL4 Li-ion battery (provided). 2.1 Charge the battery The EN-EL4 is not fully charged at shipment. To maximize shooting time, charge the battery in the supplied MH-21 quick charger before use (see the MH-21 instruction manual for details). About 100 minutes are required to fully recharge the battery when no charge remains. 2.2 Turn the camera off Turn the camera off before inserting or removing batteries. 2.3 Remove the battery-chamber cover Turn the battery-chamber cover latch to the open position ( ) and remove the batterychamber cover. 2.4 Attach the battery cover to the battery The battery can be charged with the cover attached. See the instructions provided with the EN-EL4 for details. 2.5 Insert the battery Insert the battery as shown at right. 2.6 Latch the battery-chamber cover To prevent the battery from being dislodged during operation, be sure the cover is securely latched. Removing the Battery Before removing the battery, turn the camera off and rotate the battery-chamber cover latch to the open position ( ). EN-EL4 Rechargeable Li-ion Batteries The EN-EL4 shares information with compatible devices, enabling the camera to show battery charge state in six levels and the MH-21 to both display the current level and charge the battery appropriately. The Battery info option in the setup menu details battery charge, battery life, and the number of pictures taken ( 211). 16