Nikon D2HS D2Hs User's Manual - Page 237

Connections-Connecting to a Computer Connecting to a Computer Data Transfer and Camera Control The supplied UC-E4 USB cable can be used to connect the camera to a computer. Once the camera is connected, PictureProject can be used to copy photographs to the computer, where they can be browsed, viewed, and retouched. The camera can also be used with Nikon Capture 4 version 4.2.1 or later (available via download to purchasers of Nikon Capture 4), which supports batch processing and more advanced image editing options and can be used to control the camera directly from the computer. Before Connecting the Camera Install the necessary software after reading the manuals and reviewing the system requirements. To ensure that data transfer is not interrupted, be sure the camera battery is fully charged. If in doubt, charge the battery before use or use an EH-6 AC adapter (available separately). Before connecting the camera, set the USB option in the setup menu ( 208) according to the computer operating system and whether the camera is being controlled from Nikon Capture 4 version 4.2.1 or later or photographs are being transferred to the computer using PictureProject: Operating system Windows XP Home Edition Windows XP Professional Mac OS X Windows 2000 Professional Windows Millennium Edition (Me) Windows 98 Second Edition (SE) Mac OS 9 PictureProject Transfer Choose PTP or Mass Storage Choose Mass Storage * Not supported Nikon Capture 4 Camera Control Choose PTP * Do NOT select PTP. If PTP is selected when the camera is connected, the Windows hardware wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera. Be sure to select Mass storage before reconnecting the camera. 223