Nikon Nikon Df Product Manual - Page 168
program last in effect will be restored the next time bracketing is
View all Nikon Nikon Df manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
❚❚ Canceling Bracketing To cancel bracketing, press the D button and rotate the main command dial until the number of shots in the bracketing sequence is zero (r) and z is no longer displayed. The program last in effect will be restored the next time bracketing is activated. Bracketing can also be cancelled by performing a twobutton reset (0 133), although in this case the bracketing program will not be restored the next time bracketing is activated. A ADL Bracketing In continuous low speed and continuous high speed modes, shooting will pause after the number of shots specified in the bracketing program have been taken. Shooting will resume the next time the shutter-release button is pressed. In self-timer mode, the camera will take the number of shots selected in Step 2 on page 145 each time the shutter-release button is pressed, regardless of the option selected for t Custom Setting c3 (Self-timer) > Number of shots (0 252); the interval between shots is however controlled by Custom Setting c3 (Selftimer) > Interval between shots. In other modes, one shot will be taken each time the shutter-release button is pressed. If the memory card fills before all shots in the sequence have been taken, shooting can be resumed from the next shot in the sequence after the memory card has been replaced or shots have been deleted to make room on the memory card. If the camera is turned off before all shots in the sequence have been taken, bracketing will resume from the next shot in the sequence when the camera is turned on. 148