Nokia N91 User Guide - Page 102
Data call, Wireless LAN, WLAN netw.
UPC - 758478008096
View all Nokia N91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Tools You can view, delete, or create these setting profiles in SIP settings. Data call The data call settings affect all access points that use a GSM data call. Online time-Set data calls to disconnect automatically after a time-out if there is no activity. To enter a time-out, select User defined, and enter the time in minutes. If you select Unlimited, data calls are not disconnected automatically. Wireless LAN Follow the instructions from your service provider. WLAN netw. name-Select Enter manually or Search for netw.. If you select an existing network, WLAN netw. mode and WLAN security mode are determined by the settings of its access point device. WLAN netw. mode-Select Ad-hoc to create an ad-hoc network and to allow devices to send and receive data directly; a wireless LAN access point device is not needed. WLAN security mode-Select the encryption used: WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them. WLAN security sett.-Enter the settings for the selected security mode: Security settings for WEP: Wep key in use-Select the WEP key number. You can create up to four WEP keys. The same settings must be entered on the wireless LAN access point device. Authentication type-Select Open or Shared for the authentication type between your device and the wireless LAN access point device. WEP key settings-Enter WEP encryption (length of the key), WEP key format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected format). Security settings for 802.1x and WPA/WPA2: WPA mode-Select the means of authentication: EAP to use an extensible authentication protocol (EAP) plug-in, or Pre-shared key to use a password. Complete the appropriate settings: EAP plug-in settings (only for EAP)-Enter the settings as your service provider instructs. Pre-shared key (only for Pre-shared key)-Enter a password. The same password must be entered on the wireless LAN access point device. TKIP encryption-Select whether Temporal Key Integrity Protocol (TKIP) is used. 102 Copyright © 2006 Nokia. All rights reserved.