Nokia N91 User Guide - Page 73

My own Server address-Enter the IP address or domain name of the push-to-talk server obtained from your service provider. User name-Enter your user name obtained from your service provider. PTT password-Enter a password, if required, to make a data connection. The password is usually provided by the service provider and is often case-sensitive. Log in to push to talk Press , and select My Own > Push to talk. Push to talk automatically logs in to the service when started. When log in is successful, push to talk automatically connects to groups that were active when the application was last closed. If the connection is lost, the device automatically tries to log back in until you choose to exit push to talk. Exit push to talk Select Options > Exit. Switch Push to talk off after exiting application? is displayed. Select Yes to keep the application active on the background or No to log out and close the service. If several applications are open and you want to switch from one application to another, press and hold . Make a one-to-one call Select Options > PTT contacts. Scroll to the contact you want to talk to from the list and select Options > Talk 1 to 1. Press and hold the entire time you are talking. When you have finished talking, release . You must end the one-to-one call before you can create a new call. Select Disconnect or press . Tip! Remember to hold the device in front of you during a push-to-talk call so you can see the display. Speak towards the microphone, and do not cover the loudspeaker with your hands. Answer a one-to-one call Press to start a one-to-one call or the call. to dismiss Tip! You can make a one-to-one or group call also from Contacts. Select Options > Talk 1 to 1 or Make PTT group call. Make a group call To call a group, select Options > PTT contacts, select Options > Make PTT group call, mark the contacts you want to call, and press . Copyright © 2006 Nokia. All rights reserved. 73