Nokia NBB0150000 Installation Guide - Page 42
Before You Start, System > Configuration > Reboot or Shutdown > Halt.
View all Nokia NBB0150000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5 Caution To protect the appliance and the compact flash memory from electrostatic discharge damage, make sure you are properly grounded before you touch these components. Use a grounding wrist strap and follow the instructions provided with the wrist strap before you handle the components or open the appliance. If you do not have a grounding wrist strap, make sure you are properly grounded before you touch any electronic component. You must perform an orderly shutdown of the appliance and turn the power off whenever you remove the chassis tray assembly to service internal components. Caution You risk damage to the appliance or loss of data if you do not use the following procedure when you replace the compact flash memory. Before You Start To replace the compact flash card in your appliance, you need the following: Physical access to the appliance A Nokia-approved compact flash card Access to the appliance through Network Voyager A Phillips-head screwdriver To replace compact flash memory in your appliance 1. Use Network Voyager or the CLI to halt the appliance. To use Network Voyager to shut the appliance down, select System > Configuration > Reboot or Shutdown > Halt. To use the CLI to shut the appliance down, enter halt at the prompt. 2. Remove the power cord from the IP150 appliance, and remove the appliance from the rack. 3. Turn the appliance upside down and place it on a safe and protected work surface 42 Nokia IP150 Security Platform Installation Guide