Nokia NBB0150000 Installation Guide - Page 47
Before You Start, To replace a hard-disk drive
View all Nokia NBB0150000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Replacing a Hard-Disk Drive Note Back up your files to a remote system on a regular basis. For back up and restore procedures, see the Getting Started Guide and Release Notes for the version of Nokia IPSO you are using. Before You Start To replace the hard-disk drive in your appliance, you need the following: Physical access to the appliance A Nokia-approved hard-disk drive Access to the appliance through Network Voyager A Phillips-head screwdriver To replace a hard-disk drive 1. Use Network Voyager or the CLI to halt the appliance. To use Network Voyager to shut the appliance down, select System > Configuration > Reboot or Shutdown > Halt. To use the CLI to shut the appliance down, enter halt at the prompt. 2. Remove the power cord from the IP150 appliance, and remove the appliance from the rack. 3. Place the appliance right-side up and place it on a safe and protected work surface. 4. Remove the three top-cover screws and slide the cover back to remove it from the appliance. 00667 5. Locate the hard-disk drive installation location and disconnect the two connectors from the drive. Nokia IP150 Security Platform Installation Guide 47