NordicTrack 9600 Plat Treadmill English Manual - Page 10
Danger
View all NordicTrack 9600 Plat Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
HOW TO CONNECT THE TREADMILL HOW TO CONNECT THE POWER CORD HOW TO CONNECT A CATV CABLE This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. DANGER: Improper connection of the equipment-grounding conductor can result in an increased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use an adapter to connect the plug to an improper receptacle. This product is for use on a dedi- 1 cated, 20-amp, 120-volt circuit. No other appli- ance should be on the same cir- cuit. This product is equipped with a cord having an Cord Bracket Bracket Screws equipment- grounding conductor and a grounding plug. Plug one end of the cord into the treadmill as shown in drawing 1. Attach the cord bracket over the cord with two bracket screws. If your treadmill has the Workout TV console, a CATV cable must be connected to the treadmill for cable TV stations to be viewed. Locate the cable jack on the front of the treadmill. Connect the CATV cable to the cable jack. Route the cable so that it will not be pinched or crushed by the wheels when the incline is changed. Cable Jack A satellite receiver, VCR, or DVD player can also be connected to the treadmill. Connect a CATV cable from the coaxial output on your equipment (usually labeled TV OUT or RF OUT) to the cable jack on the front of the treadmill. Note: Audio/video equipment without coaxial outputs (some satellite receivers and DVD players) will require an RF modulator to work correctly with the treadmill. RF modulators are not available from FreeMotion Fitness, but are available at electronics stores. See the owner's manual for the equipment you wish to connect to determine if an RF modulator is needed, or contact your local audio/visual service provider. Plug the grounding plug into a standard NEMA 5-20 receptacle as shown in drawing 2. Do not modify the plug or the receptacle. Do not use an adapter, a surge protector, or an extension cord. 1 NEMA 5-20 Receptacle 10