NordicTrack 9600 Plat Treadmill English Manual - Page 24
AGE/WT button until the words SAFETY KEY EN
View all NordicTrack 9600 Plat Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
9 Press the ENTER AGE/WT button again to check for system errors. If there are no system errors, the words NO SYSTEM ERRORS will appear in the main display. If a system error appears, call Customer Care toll-free at 1-800-201-2109. 12 Press the ENTER AGE/WT button again and select a cable TV connection or an antenna connection. If you are using a cable TV connection, press the + or - button beside the ENTER AGE/WT button until the words TV MODE CABLE STATIONS appear in the main display. If you are using an antenna connection, press the + or - button until the words TV MODE AIR STATIONS appear. 10 Press the ENTER AGE/WT button again and enable or disable the safety key. To require the use of the safety key with the console, press the + or - button above the ENTER AGE/WT button until the words SAFETY KEY ENABLED appear in the main display. To allow the treadmill to be used without the key, press the + or - button until the words SAFETY KEY DISABLED appear. CAUTION: If the safety key is missing or damaged, call Customer Care toll-free at 1-800-201-2109, Monday through Friday, 8 a.m. until 5 p.m. Mountain Time. 13 Press the ENTER AGE/WT button again and program TV channels. The console has the capability to find and store in memory all of the valid TV channels in your area. While the words PRESS CHANNEL UP TO SCAN TV CHANNELS are scrolling across the main display, press the CHANNEL + button to start the channel scanning process. If you have the Basic console, go to step 15. If you have the Workout TV console, go to step 11. 11 Press the ENTER AGE/WT button again and enable or disable the TV. To make the TV available for use, press the + or - button above the ENTER AGE/WT button until the words TV POWER ON appear in the main display. To prevent the TV from being used, press the + or - button until the words TV POWER OFF appear. The console will begin scanning all TV channels. If no broadcast signal is detected on a channel, the channel will be skipped; if a signal is detected, a tone will sound and the channel will be stored in memory. This process will continue until the highest channel is reached. The lowest channel stored in memory will then appear in the main display. If you have disabled the TV, go to step 15. If you have enabled the TV, go to step 12. 24