NordicTrack Elite 5000 Instruction Manual - Page 10

Screws. The #8 x 3/4 Truss Head Screws

Get NordicTrack Elite 5000 PDF manuals and user guides View all NordicTrack Elite 5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

4. Remove and discard the four indicated screws (B). Then, remove the Tray Fan (104) from the 4 Upright Crossbar (111). B 111 B 104 5. Carefully slide the Upright Crossbar (111) between the Left and Right Uprights (115, 116). 5 Attach the Upright Crossbar with four 5/16" x 3/4" Screws (1); start all four Screws, and then tighten them. 111 1 116 1 115 6. Hold the Tray Fan (104) near the Right Upright (116). Wrap the tie (C) in the hole (D) in the side 6 of the Right Upright around the end of the fan E 104 wire (E). Pull the fan wire into the hole and out of the top of the Right Upright. Then, remove the tie. Identify the #8 x 3/4" Truss Head Screws (6). D IMPORTANT: Do not confuse the #8 x 3/4" Screws (5) with the #8 x 3/4" Truss Head Screws. The #8 x 3/4" Truss Head Screws C 6 111 6 have flatter heads. Attach the Tray Fan (104) to the Upright 116 Crossbar (111) with four #8 x 3/4" Truss Head Screws (6); start all four Screws, and then tighten them. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
10
5.
Carefully slide the Upright Crossbar (111)
between the Left and Right Uprights (115, 116).
Attach the Upright Crossbar with four 5/16" x
3/4" Screws (1);
start all four Screws, and then
tighten them.
5
115
1
111
116
1
4.
Remove and discard the four indicated screws
(B). Then, remove the Tray Fan (104) from the
Upright Crossbar (111).
111
B
B
104
4
6.
Hold the Tray Fan (104) near the Right Upright
(116). Wrap the tie (C) in the hole (D) in the side
of the Right Upright around the end of the fan
wire (E). Pull the fan wire into the hole and out
of the top of the Right Upright. Then, remove the
tie.
Identify the #8 x 3/4" Truss Head Screws (6).
IMPORTANT: Do not confuse the #8 x 3/4"
Screws (5) with the #8 x 3/4" Truss Head
Screws. The #8 x 3/4" Truss Head Screws
have flatter heads.
Attach the Tray Fan (104) to the Upright
Crossbar (111) with four #8 x 3/4" Truss Head
Screws (6);
start all four Screws, and then
tighten them.
6
6
116
C
E
111
6
104
D