NordicTrack Elite 5000 Instruction Manual - Page 12

May Become Damaged When You Turn

Get NordicTrack Elite 5000 PDF manuals and user guides View all NordicTrack Elite 5000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

9. IMPORTANT: To avoid damaging the Pulse Crossbar (110), do not use power tools, and do not overtighten the #10 x 3/4" Screws (7) or 9 2 7 the 5/16" x 2" Screws (2). 8 Orient the Pulse Crossbar (110) as shown. Attach the Pulse Crossbar with two of the 5/16" x 2" Screws (2) that you removed in step 7, two 5/16" Star Washers (8), and two #10 x 3/4" Screws (7); start all four Screws, and then tighten them. 2 Then, tighten the other two 5/16" x 2" Screws (2). 110 2 7 8 2 10. W ith the help of a second person, hold the console assembly (G) near the Handrails (108).  See the inset drawing. Connect the Upright Wire (117) to the console wire (I). The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Next, connect the two fan wires (E, J). Then, remove any wire ties from the Upright Wire (117) and the fan wires. Connect the two coaxial cables on the other side (not shown). Insert the excess cable and wire into the Right Upright (116). 10 G I 117 108 J E 116 I 117 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
12
10.
With the help of a second person, hold the con-
sole assembly (G) near the Handrails (108).
See the inset drawing.
Connect the Upright
Wire (117) to the console wire (I).
The connec-
tors should slide together easily and snap
into place.
If they do not, turn one connector
and try again.
IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Next, connect the two fan wires (E, J). Then,
remove any wire ties from the Upright Wire (117)
and the fan wires.
Connect the two coaxial cables on the other
side (not shown).
Insert the excess cable and
wire into the Right Upright (116).
117
G
10
9.
IMPORTANT: To avoid damaging the Pulse
Crossbar (110), do not use power tools, and
do not overtighten the #10 x 3/4" Screws (7) or
the 5/16" x 2" Screws (2).
Orient the Pulse Crossbar (110) as shown. Attach
the Pulse Crossbar with two of the 5/16" x 2"
Screws (2) that you removed in step 7, two 5/16"
Star Washers (8), and two #10 x 3/4" Screws (7);
start all four Screws, and then tighten them.
Then, tighten the other two 5/16" x 2"
Screws (2).
110
9
8
8
2
2
117
I
2
2
7
7
E
J
108
116
I