NordicTrack Elite 5000 Instruction Manual - Page 33

11. Enable or disable a passcode. Next, press the play button on your personal audio player.  The console features a child-safety passcode, Adjust the volume level using designed to prevent unauthorized users from using the volume increase and the treadmill. decrease buttons on the con- sole or the volume control on  Touch the Passcode button. To enable a pass- your personal audio player. code, touch the Enable checkbox. Then, enter a 4-digit passcode of your choice. Touch Save to use If you are using a personal CD player and the CD this passcode. Touch Cancel to return to the equip- skips, set the CD player on the floor or another flat ment settings mode and not use a passcode. To surface instead of on the console. disable the passcode, touch the Disable checkbox. To listen to the digital TV audio with your personal Note: If a passcode is enabled, the console will headphones or ear buds, plug your headphones into regularly ask for you to enter the passcode. The the headphones jack on the console. Note: This audio console will remain locked until the correct pass- jack is for audio output only. code is entered. IMPORTANT: If you forget your passcode, enter the following master passcodeETNE40915 to unlock the console: 1985. (NETHLO4W09T1O5)USE THE INTERNET BROWSER 12. Set a safety screen timeout. The console features an automatic screen reset; if no buttons are touched or pressed and the walking belt does not move for a set amount of time, the console will automatically reset. To set the amount of time the console will wait before it automatically resets, touch the Safety Screen Timeout button to view a list of times. Then, select the amount of time desired. Touch the back button on the screen. Note: To use the browser, you must have access to a wireless network including an 802.11b/g/n router with SSID broadcast enabled (hidden networks are not supported). To open the browser, touch the globe button near the lower left corner of the screen. Then, select a website. To navigate the Internet browser, touch the Back, Refresh, and Forward buttons on the screen. To exit the Internet browser, touch the Return button on the screen. 13. Exit the equipment settings mode.  To exit the equipment settings mode, touch the back button on the screen. HOW TO USE THE SOUND SYSTEM To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 23. To enter a different web address in the URL bar, first, slide your finger down the screen to view the URL bar, if necessary. Then, touch the URL bar, use the keyboard to enter the address, and touch the Go button. To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Note: While you are using the browser, the speed, incline, fan, and volume buttons will still function, but the workout buttons will not function. Note: If you have questions after following these instructions, go to support.iFit.com for assistance. 33