NordicTrack Freestride Trainer Fs7i Elliptical Uk Manual - Page 21

HOW TO USE THE INTERNET BROWSER Note: To use the internet browser, you must have access to a wireless network including a wireless router (802.11b/g/n) with SSID broadcast enabled (hidden networks are not supported). To open the internet browser, touch the globe button at the bottom of the screen. Then, select a website. To navigate the internet browser, touch the Back, Refresh, and Forward buttons on the screen. To exit the internet browser, touch the Return button on the screen. To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 15. To enter a different web address in the URL bar, first, slide your finger down the screen to view the URL bar, if necessary. Then, touch the URL bar, use the keyboard to enter the address, and touch the Go button. Note: While you are using the internet browser, the resistance, incline, fan, and volume buttons will still function, but the workout buttons will not function. Note: If you have questions after following these instructions, go to support.iFit.com for assistance. HOW TO USE THE EQUIPMENT SETTINGS MODE IMPORTANT: Some of the features described may not be enabled. Occasionally, a firmware update may cause your console to function slightly differently. 1. Select the settings main menu. Turn on the console and select the main menu (see steps 1 and 2 on page 16). Then, touch the gears button at the bottom of the screen to select the settings main menu. Note: You can also press the center button on the console to select the settings main menu. 2. Select the equipment settings mode. In the settings main menu, touch the Equipment Settings button. Note: It may be necessary to scroll the screen to view all the menu options. 3. Enable or disable the auto relogin feature. Enable this feature to have the console automatically log in to your iFit account when you turn on the power. Note: This feature is recommended for private owners of the elliptical only. To enable or disable the auto relogin feature, first touch the Auto Relogin button. Next, touch the Enable checkbox or the Disable checkbox. Then, touch the back button on the screen. 4. Enable or disable automatic console updates. To enable or disable automatic console updates, first touch the Auto Update button. Next, touch the Enable checkbox or the Disable checkbox. Then, touch the back button on the screen. Note: To select a time for automatic console updates, see step 13. 5. Enable or disable the internet browser. To enable or disable the internet browser, first touch the Browser button. Next, touch the Enable checkbox or the Disable checkbox. Then, touch the back button on the screen. 6. Turn on or turn off the display demo mode. The console features a display demo mode, designed to be used if the elliptical is displayed in a store. While the demo mode is turned on, the screen will show a preset presentation when the elliptical is not in use. To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox. Then, touch the back button on the screen. 21