NordicTrack Freestride Trainer Fs7i Elliptical Uk Manual - Page 8
Identify the Left Pedal Arm 9. Insert the axle
View all NordicTrack Freestride Trainer Fs7i Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
6. Identify the Left Pedal Arm (9). Insert the axle on the Left Pedal Arm into the Left Leg (6). Attach the Left Pedal Arm (9) with an M8 x 14mm Shoulder Screw (112), an Outer Pedal Cover (133), and a Pedal Arm Washer (89). Attach the Right Pedal Arm (132) to the Right Leg (5) in the same way. 6 5 132 9 89 6 133 112 7. See the inset drawing. Loosen the indicated M8 x 45mm Bolt (124). 7 Next, rotate the Right Upper Body Arm (7) into the vertical position. Secure the Right Upper Body Arm (7) to the Right Leg (5) with an M8 x 45mm Bolt (124) and an M8 Locknut (123). IMPORTANT: See the inset drawing. Tighten the indicated M8 x 45mm Bolt (124). Tip: Avoid pinching the wires (not shown). Slide the Right Leg Cover B (36) downward and press it into place. Repeat this step on the other side of the elliptical. 124 123 5 Avoid pinching the wires 7 36 124 8