NordicTrack Freestride Trainer Fs7i Elliptical Uk Manual - Page 6
Assembly
View all NordicTrack Freestride Trainer Fs7i Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver two adjustable wrenches one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have internet access, call Customer Service (see the front cover of this manual) and register your product. 2. With the help of a second person, raise the Upright (2) to the vertical position. 2 While a second person holds the Upright (2), attach the Upper Pillar (47) to the Lower Pillar (48) with two M8 x 45mm Bolts (124) and two M8 Locknuts (123); start both Bolts, and then tighten them. Make sure that the indicated Locknut is in the hexagonal hole (A). 2 A 123 124 48 47 123 124 6