NordicTrack Incline Trainer X7i Treadmill English Manual - Page 10
Attach the other Upright not shown
View all NordicTrack Incline Trainer X7i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
3. Attach the Upright (77) to the Base (80) with two 3/8" x 5 1/2" Screws (5) and a 3/8" x 2 3/4" 3 Screw (17) with three 3/8" Star Washers (8) as shown. Start all three Screws, and then tighten them. Be careful not to pinch the Upright Wire (not shown) in the Upright. Attach the other Upright (not shown) as described above. Note: There is not a wire on the left side. 77 5 8 4. Set the Console (37) face down on a soft surface 4 to avoid scratching the Console. Remove and discard the four screws (A) from the Console A Base Back (89). Lift off the Console Base Back. 8 80 17 89 A 37 10
10
3.
Attach the Upright (77) to the Base (80) with
two 3/8" x 5 1/2" Screws (5) and a 3/8" x 2 3/4"
Screw (17) with three 3/8" Star Washers (8)
as shown.
Start all three Screws, and then
tighten them.
Be careful not to pinch the
Upright Wire (not shown) in the Upright.
Attach the other Upright (not shown) as
described above.
Note: There is not a wire on
the left side.
3
77
17
80
8
8
5
4
89
37
A
A
4.
Set the Console (37) face down on a soft surface
to avoid scratching the Console. Remove and
discard the four screws (A) from the Console
Base Back (89). Lift off the Console Base Back.