NordicTrack Incline Trainer X7i Treadmill English Manual - Page 9

ASSEMBLY •• Assembly requires two persons. •• To identify small parts, see page 8. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• Assembly requires the following tools: the included hex keys •• After shipping, there may be an oily substance on the exterior of the incline trainer. This is normal. If there is an oily substance on the incline trainer, wipe it off with a soft cloth and a mild, non-abrasive cleaner. one Phillips screwdriver To avoid damaging parts, do not use power tools. 1. Go to www.nordictrackservice.com/registra- tion on your computer and register your 1 product. •• activates your warranty •• saves you time if you ever need to contact Customer Care •• allows us to notify you of upgrades and offers Note: If you do not have Internet access, call CUSTOMER CARE (see the front cover of this manual) and register your product. 2. Make sure that the power cord is unplugged. 2 Identify the right Upright (77), which has a wire tie in it. Hold the Upright near the right side of the incline trainer. See the inset drawing. Tie the wire tie in the right Upright (77) around the end of the Upright Wire (78). Then, pull the other end of the wire tie until the Upright Wire is routed out of the top of the Upright. Wire Tie 77 Wire Tie 78 78 77 9