NordicTrack Incline Trainer X7i Treadmill English Manual - Page 14
Attach the Right Inside Cover and the Right
View all NordicTrack Incline Trainer X7i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
11. See page 15 and plug in the power cord. Next, see page 17 and turn on the power. Then, touch 11 the 1 Step Incline button numbered 40 on the console. The Frame (58) will adjust to an incline of 40 percent. Then, turn off the incline trainer and unplug the power cord. Identify the Left Inside Cover (3) and the Left Outside Cover (90). Next, hold the Left Inside Cover against the left Upright (77). Then, hold the Left Outside Cover against the Left Inside Cover. 1 Attach the Left Outside Cover (90) to the Left Inside Cover (3) with three #8 x 3/4" Screws (1). Start all three Screws and then tighten them. Attach the Right Inside Cover and the Right Outside Cover (not shown) as described above. 1 12. If necessary, move the incline trainer to the desired location (see HOW TO MOVE THE 12 INCLINE TRAINER on page 25). After the incline trainer is placed in the location where it will be used, make sure that the incline trainer rests firmly on the floor. If the incline trainer rocks even slightly, turn the Leveling Feet (15) as needed until the rocking motion is eliminated. 58 77 90 3 15 15 13. Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 27 and 28). To protect the floor or carpet from damage, place a mat under the incline trainer. 14