NordicTrack Incline Trainer X7i Treadmill English Manual - Page 23
Clear WiFi Setting
View all NordicTrack Incline Trainer X7i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Clear WiFi Setting-To erase the console's wireless network settings and have it forget the currently selected wireless network, follow the instructions in the matrix. 4. Use WiFi-Normal to set up a wireless connection. A numerical code and a web address will appear in the matrix. Go to the web address on your internetcompatible device. Log in to your iFit account on the web page. Then, enter the numerical code into the indicated field. Follow any other instructions on the web page. This option will allow you to set up a wireless network connection using the console. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. To set up a wireless network connection using the console, first press the Enter button. When the console is connected to a wireless network, the wireless symbol in the display will stop flashing and become solid. The wireless symbol will show the strength of your wireless signal; four arcs indicate full signal strength. If you cannot complete any part of this process, or if you have any questions, go to support.ifit.com for assistance. Next, set the included WiFi setup card on the console. The buttons on the WiFi setup card are referenced in the following instructions. Card 5. Use WiFi-WPS to set up a wireless connection. This option will allow you to set up a wireless network connection using your WPS router. To set up a wireless network connection using your WPS router, first press the Enter button and follow the instructions in the matrix. A numerical code and a web address will appear in the matrix. Go to the web address on your internetcompatible device. A list of networks will appear in the matrix. Press the up and down buttons to highlight the desired network. Then, press the Enter button. Note: Do not select IFIT_SETUP. Note: The time display will show the number of the currently-selected access point. The distance display will show the total number of access points detected. Log in to your iFit account on the web page. Then, enter the numerical code into the indicated field. Follow any other instructions on the web page. When the console is connected to a wireless network, the wireless symbol in the display will stop flashing and become solid. The wireless symbol will show the strength of your wireless signal; four arcs indicate full signal strength. If the network has a password, enter the password. A keyboard will appear in the matrix. As necessary, press the buttons on the WiFi setup card to select the caps option, the number option, or the symbol option. If you cannot complete any part of this process, or if you have any questions, go to support.iFit.com for assistance. Press the up, down, left, and right buttons to highlight the desired letter or number. Then, press the Enter button to select the letter, number, or symbol. When you have finished entering the password, press the Done button. 23