NordicTrack Incline Trainer X7i Treadmill English Manual - Page 13
Set the Left Handrail Assembly 86 onto
View all NordicTrack Incline Trainer X7i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
9. Hold the Left Handrail Assembly (86) near the left Upright (77). Insert the pulse wire from the Left Handrail Assembly into the hole in the top of the Upright and pull it out of the end of the Upright. Set the Left Handrail Assembly (86) onto the left Upright (77). Make sure that no wires are pinched. Attach the Left Handrail Assembly (86) with two 3/8" x 5 1/2" Screws (5) and two 3/8" Star Washers (8). Note: Start the lower Screw first. Insert the pulse wire through the three ties (only two are shown). Connect the two "L" pulse wires (see step 8). 9 Ties R 10. Attach the Console Base Back (89) to the Console Base (87) with nine #8 x 3/4" Machine 10 Screws (16) and two #8 x 3/4" Screws (1) in the locations shown. Start all eleven Screws, and then tighten them. Do not overtighten the Screws. Make sure that no wires are pinched. 87 L 86 "L" Pulse Wire Tie 77 8 5 Start First 16 16 89 1 16 16 16 1 13