Oki B4300 Guide: User's B4200/B4300 - Page 70

WARNING, Gently wipe the LED array surface with the LED lens cleaner

Get Oki B4300 PDF manuals and user guides View all Oki B4300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Switch off the printer and allow the fuser to cool for about 10 minutes before opening the top cover. 1. Press the top cover release button and open the printer's top cover fully. WARNING! If the printer has been powered on, the fuser may be hot. This area is clearly labelled. Do not touch. 2. Pull the colored lever on the right side of the toner cartridge towards the front of the printer to close the cartridge then remove the used toner cartridge. 3. Follow the installation instructions on or inside the box containing the new toner cartridge to install the new cartridge. 4. Gently wipe the LED array surface with the LED lens cleaner that came with the new toner cartridge or soft tissue. 5. Close the top cover and press it down to latch it closed. CONSUMABLES AND MAINTENANCE > 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
CONSUMABLES AND MAINTENANCE > 70
Switch off the printer and allow the fuser to cool for about 10 minutes
before opening the top cover.
1.
Press the top cover release button and open the printer’s top cover
fully.
2.
Pull the colored lever on the right side of the toner cartridge
towards the front of the printer to close the cartridge then remove
the used toner cartridge.
3.
Follow the installation instructions on or inside the box containing
the new toner cartridge to install the new cartridge.
4.
Gently wipe the LED array surface with the LED lens cleaner that
came with the new toner cartridge or soft tissue.
5.
Close the top cover and press it down to latch it closed.
WARNING!
If the printer has been powered on, the fuser may be hot. This area is clearly
labelled. Do not touch.