Oki B710n B710, B720, B730 Setup Guide (English, Fran栩s, Espa?ol, P - Page 7

When handling the drum-toner cartridge, take note of the following points: WARNING! Never throw a drum-toner cartridge into an open flame as it can cause an explosion. • Do not subject the drum-toner cartridge to direct sunlight or strong light. • When installing the drum-toner cartridge, select a location not subject to strong light and try to finish the installation within 5 minutes. • Do not touch the surface of the photosensitive drum. Do not let the drum-toner cartridge stand upside down or place it upside down as this may damage the drum. • A drum shutter protects the photosensitive drum from light. Do not open the drum shutter. • Although the toner is not harmful to the body, wash it off immediately with cold water if your hands or clothes are in contact with it. • It is recommended to use up the drum-toner cartridge within one year of removing it from its packaging. • Keep the drum-toner cartridge out of the reach of children. 1. Open the cover. 2. Take the drum-toner cartridge out of the packaging box and shake it seven or eight times as shown in the diagram. 3. Place the drum-toner cartridge on a flat surface and pull out the seal horizontally. CAUTION! When pulling out the seal, pull it out horizontally. The tape might break if it is pulled out diagonally. After the seal has been pulled out, do not shake or bump the drum-toner cartridge. 4. Hold the drum-toner cartridge by the grip and insert it into the slot inside the printer. NOTE When the optional offset catch tray is installed, fold the tray first before opening the cover. WARNING! Do not touch any parts inside the printer. CAUTION! Ensure that the drum-toner cartridge is firmly located. 5. Close the cover securely. NOTE If the offset catch tray is folded as in Step 1, close the cover and then return the tray to its original position. 7 / English