Oki B710n B710, B720, B730 Setup Guide (English, Fran栩s, Espa?ol, P - Page 8
Load paper
View all Oki B710n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Load paper 1. Remove the paper tray from the printer. Place it on a flat surface and remove the lid. 4. Load the paper with the side to be printed facing up and with all four corners aligned. 2. If the base plate of the paper tray is raised, push it down. 3. Squeeze the length guide and slide it to the desired paper size (1). Squeeze the right width guide and slide it to the desired paper size (2). CAUTION! Do not place paper over the right width guide. Do not load paper exceeding the maximum fill line or the maximum capacity allowed. Align the right width guide with the paper width correctly. If the right width guide is not in place, the paper will not be properly fed and this may cause paper jams. 5. Replace the lid of the paper tray and push the tray completely into the printer. CAUTION! The lid of the tray must be firmly closed. If not, the paper may become misaligned. 6. Depending on the types and sizes of the loaded paper, you need to configure settings on the control panel: • Change the paper type when non-plain paper such as recycled paper, heavyweight paper or transparencies is loaded. • Configure the paper size when custom size paper is loaded unless using Express Print, which is described under "Print Media" in the User's Guide supplied on the CD furnished with your printer. 8 / English