Oki C5400 OkiLAN 8100 SoftNIC User's Guide - Page 116

NetWare, Remote Server mode, Printer cannot find the network print server.

Get Oki C5400 PDF manuals and user guides View all Oki C5400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 116 highlights

If printing with FTP, the User name printed is the User name entered during FTP login and the File name printed is the Transmitted file name. If the Print Directory name is indicated in the put command, the File name is not printed. The Printer name printed is the Logical Directory name. NetWare Printer cannot find the network print server. Turn the printer off and on again. Confirm the network interface is enabled on the printer. Check the network cable is correctly connected. Change the cable and try again. If the standard configuration utility is used, check the NetWare network number in the environment settings. If the NetWare protocol is disabled, set it to Enable. Reset the network interface card to factory default settings. The network print server is identified by the setup utility but not by the NetWare server. Start up the NetWare server and check the NIC configuration. Check the NSAP packet on the NetWare server is not set to Disable. Remote Server mode Check the correct print server is operating on the file server. Check the Print Server name operating on the File Server and the Print Server name set in the NIC are the same. Check the Printer name displayed in the Print Server monitor of the File Server and the NetWare Port name set in the NIC are the same. If there are multiple network interface cards, configure the NetWare Port names to be different. Troubleshooting 114

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Troubleshooting 114
If printing with FTP, the User name printed is the User name entered
during FTP login and the File name printed is the Transmitted file name.
If the Print Directory name is indicated in the put command, the File name
is not printed. The Printer name printed is the Logical Directory name.
NetWare
Printer cannot find the network print server.
Turn the printer off and on again.
Confirm the network interface is enabled on the printer.
Check the network cable is correctly connected.
Change the cable and try again.
If the standard configuration utility is used, check the NetWare network
number in the environment settings.
If the NetWare protocol is disabled, set it to Enable.
Reset the network interface card to factory default settings.
The network print server is identified by the setup utility but not by
the NetWare server.
Start up the NetWare server and check the NIC configuration.
Check the NSAP packet on the NetWare server is not set to Disable.
Remote Server mode
Check the correct print server is operating on the file server.
Check the Print Server name operating on the File Server and the Print
Server name set in the NIC are the same.
Check the Printer name displayed in the Print Server monitor of the File
Server and the NetWare Port name set in the NIC are the same. If there are
multiple network interface cards, configure the NetWare Port names to be
different.