Oki C5400 OkiLAN 8100 SoftNIC User's Guide - Page 47
Using SNMP, Using Setup Assistant, Network Software CD- ROM. - firmware
View all Oki C5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using SNMP The printer and network card can be managed via a standard SNMP management station. The network card supports SNMPv1, MIB-II and OKI Data Private MIB. In order for the OkiLAN to be managed correctly from an SNMP management station, the OKI Data Private MIB needs to be added to that management station. Please refer to the SNMP manager documentation for information on how to do this. The OKI Data Private MIB file can be found in the MIB folder on the Network Software CD- ROM. Please refer to the readme file in the MIB folder for further information. The printer's trap address can be set in five places using TCP/IP and in one place with IPX. Printer trap settings can be made with TELNET and a Web browser. Using Setup Assistant Setup Assistant is a large volume tool that can do the following: > setup ID addresses on multiple print servers all at once. > update firmware on multiple print servers all at once. > update the template file and set details in multiple print servers all at once. Install Setup Assistant from the CD-ROM provided with your printer. 1. Insert the CD-ROM provided with your printer into the CD-ROM drive. If the Menu Installer does not start automatically, click Start→Run→Browse. Browse to your CD-ROM and click Install→Οpen→OK. 2. Select [Network Software]. 3. Select [Installation/Config]. 4. Select [Setup Assistant]. 5. Follow the on-screen instructions. Configuration 45