Oki C911dn C911dn/C931dn/C941dn Advanced User's Guide - Page 212
Security, IP filtering, IPP port No.
View all Oki C911dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
Convenient print functions Matching Colors Using Utility Software Network setting items Security Item 1 Web Page Configuration Tool/ Network Setting Plug-in Network Card Setup Utility (Mac OS X) Factory Default Settings Explanation NetBIOS over - 2 TCP - Enable Specifies whether to use NetBIOS over TCP. EtherTalk - - Disable Specifies whether to use EtherTalk. Web (port No.: Device setup Web setup 80) (web) - Enabled 3 Web - - Enable 80 Specifies whether to access the device using web pages. Specifies the port number to access the device web page. IPP (port No.: - 631) - Disable Specifies whether to use IPP. Telnet 4 FTP - - Disable Specifies whether to access the device using Telnet. - - Disable Specifies whether to access the device using FTP. SNMP - - Enable Specifies whether to access the device using SNMP. SNTP - 5 Local Ports - - Disable - Enable Specifies whether to use SNTP. Specifies whether to use specific protocols. SMTP sending - - 25 Specifies the SMTP send port number. Network functions Change password Change password Change password (Last 6 digits of MAC address) Sets a new administrator password using 15 single-byte characters max. The password is case-sensitive. This password is used only when changing the setup from the utilities. The administrator password set using the device cannot be changed from this item. Network Setup Checking and Changing Printer Settings Using the Control Panel Appendix Index IP filtering Web Page IP filtering Item Configuration Tool/ Network Setting Plug-in - Network Card Setup Utility (Mac OS X) Factory Default Settings - Disable Start address - 1 to 10 End address - 1 to 10 Print 1 to 10 - Setup 1 to 10 - IP address of - the registered administrator - 0.0.0.0 - 0.0.0.0 - Disable - Disable - 0.0.0.0 Explanation Specifies whether to use IP filtering. Make sure to make the following category settings if enabling IP filtering. Unless these settings are made, the device cannot be accessed via TCP/IP. Specifies the IP address authorized by access to the device. You can specify individual addresses or the address range. Specifies whether to authorize print jobs from the specified IP address. Specifies whether to authorize setup changes from the specified IP address. Automatically specifies the administrator IP address. Normally only this address can access the device. All accesses are authorized via proxy servers if the administrator accesses the server via a proxy server. - 212 -