Oki C9300n C9300/C9500 User's Guide: Macintosh - Page 205
Installing additional memory, If the maximum amount of memory is being installed in
View all Oki C9300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Installing additional memory NOTE If the maximum amount of memory is being installed in the printer (three 256 MB modules), the memory modules that were originally installed must be removed. 1. Switch off the printer and disconnect the power cable and printer interface cable. 2. Loosen the two screws (1) and remove the main board. 3. Insert the memory modules the slots as follows: push out the white tabs at either end of the socket. C9300/C9500 Accessories • 203
C9300/C9500 Accessories • 203
Installing additional memory
1.
Switch off the printer and disconnect the power cable and printer
interface cable.
2.
Loosen the two screws (1) and remove the main board.
3.
Insert the memory modules the slots as follows:
push out the
white tabs at either end of the socket.
NOTE
If the maximum amount of memory is being installed in the
printer (three 256 MB modules), the memory modules that
were originally installed must be removed.