Oki C9300n C9300/C9500 User's Guide: Macintosh - Page 60
Network menu Only appears if the network card is installed. The default settings are bold.
View all Oki C9300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Item OFFLINE RECEIVE USB menu (continued) The default settings are bold. Value Enable; Disable Description When set to Enable, this function maintains reception without changing the interface signal, even if an alarm occurs. The interface stays open even if the ON LINE button is pressed. The interface issues a BUSY signal only when the receive buffer is full or when a service call occurs. Network menu Only appears if the network card is installed. The default settings are bold. Item TCP/IP NETWARE ETHERTALK NETBEUI FRAME TYPE DHCP/BOOTP RARP IP ADDRESS SUBNET MASK GATEWAY ADDRESS PRINT SETTINGS INITIALIZE Value Enable; Disable Enable; Disable Enable; Disable Enable; Disable Auto; 802.2; 802.3 Ether-II; Snap Enable; Disable Enable; Disable xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx ON; OFF ON; OFF Description Selects TCP/IP protocol. Selects Netware protocol. Selects EtherTalk protocol. Selects NetBEUI protocol. Selects Ethernet frame type. Selects whether selection of DHCP/BOOP is automatic. Selects whether selection of RARP is automatic. Configures IP address of 12 alphanumeric characters. Configures subnet mask of 12 alphanumeric characters. Configures gateway address of 12 alphanumeric characters. Selects printing of network menu map. Selects network initialization. C9300/C9500 Setting up • 58