Oki C9300n C9300/C9500 User's Guide: Macintosh - Page 27
Power connection
View all Oki C9300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
POWER CONNECTION WARNING Ensure both the printer power switch and the AC supply are switched OFF before connecting the power cable. 1. Connect the power cable (1) to the power socket on the printer, then to a grounded power supply outlet. 2 1 2. Switch the printer ON using the main power switch (2). The printer will go through its initialization and warm up sequence. When the printer is ready, the READY indicator comes on and stays on (green) and the LCD indicates ONLINE. NOTE After installing the new toner cartridges, the message TONER LOW or CHANGE TONER may appear on the display. If this message does not disappear after a few pages have been printed, reinstall the appropriate toner cartridge. C9300/C9500 Setting up • 25
C9300/C9500 Setting up
• 25
POWER CONNECTION
1.
Connect the power cable (1) to the power socket on the printer,
then to a grounded power supply outlet.
2.
Switch the printer ON using the main power switch (2).
The printer will go through its initialization and warm up sequence.
When the printer is ready, the READY indicator comes on and stays
on (green) and the LCD indicates ONLINE.
WARNING
Ensure both the printer power switch and the AC supply
are switched OFF before connecting the power cable.
NOTE
After installing the new toner cartridges, the message
TONER LOW or CHANGE TONER may appear on the display.
If this message does not disappear after a few pages have
been printed, reinstall the appropriate toner cartridge.
2
1