Oki B2200 B2200/B2400 User's Guide (English) - Page 9

PRINT MEDIA Print media that can be used with your printer includes standard copier bond paper, certain types of envelope and certain types of transparency. PAPER The best type of paper to choose is standard 18 to 20 lb. (80-90g/ m²) bond paper designed for use in plain paper copiers and laser type printers. Pre-printed stationery, such as letterhead paper can also be used as long as the pre-printed parts can withstand a combination of heat and pressure. Experience will determine the suitability or otherwise of particular pre-printed stationery. Avoid using paper that is damaged in any way, such as folded, perforated, torn or stapled sheets, and avoid feeding the same sheet twice to print on both sides. Also avoid using very glossy or heavily embossed paper. Store paper flat and sealed in its original wrapping until required for use. Paper left out tends to absorb moisture from the air. This makes it prone to curling and also less able to retain a permanent image. The paper tray can hold up to about 150 sheets of standard bond paper. The manual feeder takes just one sheet at a time. Take just enough paper from its wrapping, fan the stack to ensure all sheets are separated from each other, then tap the stack flush again before loading. Load pre-printed stationery top edge first and face down into the paper tray or face up into the manual feeder. If plain paper seems to curl excessively during the print process, try turning the stack over in the input tray. You may have been printing on the wrong side. B2200/2400 User's Guide Print media > 9