Olympus 262010 E-3 Instruction Manual (English) - Page 118
Error codes
UPC - 050332160569
View all Olympus 262010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Viewing pictures on a computer Viewing the entire picture on a computer screen The size of the picture displayed on a computer screen changes depending on the computer settings. When the monitor setting is 1024 × 768 and you are using Internet Explorer to view a picture with an image size of 2048 × 1536 at 100%, the entire picture cannot be viewed without scrolling. There are several ways you can view the entire picture on the computer screen. View the picture using image browsing software • Install the OLYMPUS Master software from the provided CD-ROM. Change the monitor setting • The icons on the computer desktop may be rearranged. For details of changing the settings on your computer, refer to the computer's manual. To view recorded images in RAW Install the OLYMPUS Master software from the provided CD-ROM. You can use the RAW development function in OLYMPUS Master to develop the RAW image in the camera setting used during shooting, as well as change detailed settings such as white balance and contrast. Error codes 11 Shooting tips and maintenance Viewfinder indications Normal indication Control panel indications Monitor indications Possible cause Corrective action NO CARD The card is not inserted, or it cannot be recognized. Insert a card or insert a different card. CARD ERROR There is a problem with the card. Insert the card again. If the problem persists, format the card. If the card cannot be formatted, it cannot be used. WRITE PROTECT Writing to the card is prohibited. The card has been set to read-only setting with the computer. Reset the card with the computer. CARD FULL The card is full. No more pictures can be taken or no more information such as print reservation can be recorded. Replace the card or erase unwanted pictures. Before erasing, download important images to a PC. 118 EN