Olympus 262010 E-3 Instruction Manual (English) - Page 79
Single-frame/Close-up playback
UPC - 050332160569
View all Olympus 262010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
7 Playback functions Single-frame/Close-up playback The basic procedure for viewing pictures are as shown below. However, before using any of these functions, follow Step 1 below. You can set the camera to automatically switch to single-frame playback mode after shooting. g"REC VIEW" (P. 100) 1 Press the q button (Single-frame playback). • The last recorded image appears. • The LCD monitor turns off after more than 1 minute if no operations are performed. The camera will turn off automatically if there is no operation after 4 hours (factory default setting). Turn on the camera again. 2 Use p to select images you want to view. You can also turn the dial to switch to U for close-up playback. < button j k INFO button p q button (Single-frame playback) LN (Close-up playback) Press p to change the close-up position. 7 Playback functions a : Displays the frame that is stored 10 frames back c : Displays the frame that is stored 10 frames ahead d : Displays the next frame b : Displays the previous frame Press the < button • Plays back the image at a 10× magnified close-up position. • To exit the playback mode, press the q button. • Pressing the shutter button halfway resumes the shooting mode. Press the INFO button (Close-up position playback) Press p to move the display of the close-up position. Press the INFO button (Close-up frame-by-frame playback) Press p to view frame-byframe close-ups. • Press the INFO button to return to close-up playback. 79 EN