Olympus 262010 E-3 Instruction Manual (English) - Page 32

Switching the information display You can switch the information displayed on the monitor by pressing INFO button repeatedly. Information display on Information display on + Ruled lines display*1 Information display on + Histogram 250 F5.6 250 F5.6 250 F5.6 1 LN 38 38 38 250 F5.6 Basic camera operations Information display off 38 Enlarged display*2 *1 Displayed when [FRAME ASSIST] is set. g"FRAME ASSIST (Ruled lines display)" (P. 95) *2 For operation in the enlarged display, refer to "Enlarged display operation". Enlarged display operation It is possible to enlarge the subject for display. Enlarging the image during MF makes focus confirmation and adjustment easier. 250 F5.6 38 1 Use p to move the frame and press the i button. • Area inside the frame is enlarged and displayed. • Press and hold the i button to return the shifted enlargement frame to the center. 2 Turn the main dial (or sub dial) to change the magnification (5×/7×/10×). • Pressing the i button cancels enlarged display operation.  TIPS Checking the image stabilizer effect: j Press and hold the o button. g"Checking the image stabilizer effect with live view" (P. 60) Checking the subject on the monitor even in low light situations: j See "LIVE VIEW BOOST" (gP. 95). x Notes • If there is a high-intensity light source within the screen, the image may be displayed darker but will be recorded normally. • If the live view function is used over a long period, the temperature of the image pickup device rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either lower the ISO sensitivity or turn off the camera for some time. • Exchanging the lens will cause live view to stop. • The following functions are not available during live view. C-AF/AE lock/[AEL/AFL] 32 EN