Olympus 262010 E-3 Instruction Manual (English) - Page 55

Registering an AF target mode You can register a frequently used AF target mode and the position of that AF target. You can then quickly load that registered setting ("home position") and use it when shooting. Registering 1 In the screen of Step 2 of "Selecting the AF target position" (gP. 54), press the < button and F button at the same time. • The home position is registered at the time the buttons AF AREA HP are pressed. • The home position cannot be registered when operated from a menu. Focusing and shooting functions SELECT Indicates that the AF target is being registered. Shooting 4 To use this function, you must assign the [P HOME] function to the < button in advance. g"; FUNCTION" (P. 92) 1 Press the < button. • The registered home position is selected. Press this button again to switch to the original AF target mode. x Notes • The AF sensitivity is not recorded when registering the home position. Focus lock k If correct focus cannot be obtained The camera's auto focus may not be able to focus on the subject in situations such as when the subject is not in the center of the frame. If this happens, the easiest solution is to use focus lock. Use this when composing the subject outside of the 11 AF targets or when the subject is difficult to focus on. 1 Adjust the AF target with the subject to be focused and press the shutter button halfway until the AF confirmation mark lights up. • The focus is locked. The AF confirmation mark and the AF target in focus light up in the viewfinder. • If the AF confirmation mark blinks, press the shutter button halfway again. • While the shutter button is being pressed, the super control panel disappears. Shutter button Card access lamp 55 EN