Olympus 262010 E-3 Instruction Manual (English) - Page 49

Exposure ... ... ... How AE bracketing compensates exposure in each exposure mode Depending on the selected exposure mode, exposure is compensated in the following way: P mode : Aperture value and shutter speed A mode : Shutter speed S mode : Aperture value M mode : Shutter speed  TIPS To apply AE bracketing to the exposure value you have compensated: j Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to the exposure value you have compensated. ISO sensitivity setting 3 The higher the ISO value, the greater the camera's light sensitivity and the better its ability to shoot in low light conditions. However, higher values may give pictures a grainy appearance. Direct button ISO + j/k j ISO button k Super control panel ip: [ISO] Menu MENU[W][ISO] [AUTO] : The sensitivity is set automatically according to the shooting conditions. For [ISO-AUTO SET], you can set the default (value normally used when the optimal exposure can be MENU button obtained) and upper limit (upper limit of ISO that automatically changes). g"ISO-AUTO i button SET" (P. 96) [100 - 3200]: Fixed ISO sensitivity. [ISO STEP] can be changed to [1/3EV] or [1EV]. g"ISO STEP" (P. 96) Setting display Viewfinder Control panel When set to [AUTO], the default value is displayed. AUTO : 100 : 3200 : • 125 and 1250 are displayed in the viewfinder as 120 and 1200, respectively.  TIPS To automatically set the optimal ISO in M mode: j Normally, the AUTO setting is effective in P/A/S mode, but you can set it for use in other shooting modes. g"ISO-AUTO" (P. 96) 49 EN